About Aqua Starter
Automatic Supply Water Pump Controller
Aqua Starter Water Pump Controller Arunachal, Silchar, Chacher District
Aqua Starter is a water pump controller based in Arunachal, Silchar, Chacher District. 3 products listed, from ₹5,500.00.
- Supply Water Pump Controller
- Automatic Water Pump Controller
- Submersible Water Pump Controller
- Save Water Electricity Pump Time
Water Pump Controller
Arunachal, Silchar, Chacher District
Water Pump Controller
Aqua Starter
Automatic Supply Water Pump Controller
Serves Assam
65 places covered
Live
3
Products
Aqua Starter Monobloc Water Pump Controller, Aqua Starter Submersible Water Pump Controller, Aqua Starter Ultimate Water Pump Controller
65
Areas served
65 places covered
₹5,500.00
Starting at
Lowest listed price
2026
Listed since
On VerifiedBizz
AQUA STARTER
Ultimate Water Pump Controller
Smart Automatic Pump Management for Different Water Sources & Pump Types, by NEXTGEN | Made in India
Aqua Starter is a smart, automatic and multi-purpose water pump controller designed to reduce manual pump operation and make everyday water management easier.
It automatically controls a water pump according to water availability, source conditions and delivery-tank level, depending on the model and installation configuration.
Aqua Starter is designed for different pumping situations, including urban/direct supply water, underground reservoirs and borewell/open-well submersible systems.
---
BASIC FUNCTIONS OF AQUA STARTER
1. Automatic Pump ON/OFF
Aqua Starter automatically starts and stops the pump according to the configured sensor and water-level conditions.
This reduces the need to manually switch the pump ON and OFF.
2. Automatic Water Transfer
The controller automates the transfer of water from a source—such as a supply pipeline, reservoir, borewell or open well—to an overhead delivery tank.
3. Tank Overflow Prevention
When the appropriate tank-level sensors are installed, Aqua Starter stops the pump when the delivery tank reaches the required full level.
This helps reduce water wastage caused by unattended pumping.
4. Dry-Run Protection
Aqua Starter helps prevent the pump from operating when adequate source water is unavailable.
This can help protect the pump and motor from damage associated with dry running.
5. Airlock Protection
The controller is designed to help manage pump operation in situations where airlock may occur, depending on the pump and installation arrangement.
6. Contactless Supply-Water Detection
The Supply Water Controller version uses the NextGen Contactless Pipeline Sensor, which is installed externally on a compatible non-metallic pipeline.
The sensor detects water availability without direct contact with the water.
7. Fail-Safe Sensor-Wire Protection
The FBSWD feature is designed to stop the pump if the relevant sensor connection becomes disconnected, providing an additional safety measure.
8. Simple Status Indication
Aqua Starter models can provide easy-to-understand LED indications for operating conditions such as:
- F — Delivery Tank Full
- L — Delivery Tank Low
- H — Reservoir / Supply High
- E — Reservoir / Supply Empty
The exact indications and functions depend on the model and configuration.
---
MAJOR BENEFITS
💧 Saves Water
Automatic pump stopping helps reduce unnecessary water overflow from the delivery tank.
⚡ Helps Reduce Unnecessary Electricity Consumption
The pump operates only when required by the configured control conditions, helping avoid unnecessary running.
🛡️ Helps Protect the Pump
Dry-run protection and automatic stopping can help reduce unnecessary stress on the pump and motor.
⏱️ Saves Time
Users do not have to repeatedly monitor and manually operate the pump.
🔄 Automatic Operation
The pump can automatically respond to water availability and tank-level conditions.
🔧 Easy & User-Friendly
Aqua Starter is designed to make automatic pump control simple for everyday users.
🌱 Responsible Resource Management
By reducing unnecessary pumping and water overflow, Aqua Starter supports more responsible use of water and electricity.
---
THREE TYPES OF AQUA STARTER
Aqua Starter can be broadly configured in three main types, according to the type of water source and pump installation:
TYPE 1 — SUPPLY WATER CONTROLLER
For Direct Mains / Urban Supply Water
TYPE 2 — MONOBLOC CONTROLLER
For Conventional Surface / Monobloc Pumps
TYPE 3 — SUBMERSIBLE CONTROLLER
For Borewell / Open-Well Submersible Pumps
The most important difference is where the water comes from and where the pump is installed.
---
TYPE 1 — AQUA STARTER SUPPLY WATER CONTROLLER
For Direct Mains / Urban Supply Water
The Supply Water Controller is designed for situations where water arrives through a direct mains or urban supply pipeline and the user wants to automatically pump that water into a delivery tank.
Typical Application
Direct Mains / Supply Pipeline → Pump → Delivery Tank / OHT
How It Works
The NextGen Contactless Pipeline Sensor is clamped externally around a compatible non-metallic supply pipeline.
When supply water becomes available, the sensor detects it and sends a signal to the controller.
The Aqua Starter then:
Supply Arrives → Sensor Detects Water → Pump ON
When the supply stops, or when the delivery tank reaches its configured full condition:
Supply Stops / Tank Full → Pump OFF
This makes it particularly useful for irregular or inconvenient supply schedules.
Installation Method
1. Install Aqua Starter near the pump/electrical connection point.
2. Clamp the NextGen Contactless Pipeline Sensor externally onto the compatible supply pipeline.
3. Connect the sensor wiring to the controller.
4. Connect the controller to the pump according to the specified electrical arrangement.
5. Install the required delivery-tank level sensing arrangement.
6. Configure and test the system.
Typical Uses
- Individual houses
- Apartments
- Small buildings
- Urban/direct mains supply systems
- Supply-water pumping installations
Best Choice When:
The water source is a supply pipeline and the pump needs to operate automatically when supply water becomes available.
---
TYPE 2 — AQUA STARTER MONOBLOC CONTROLLER
For Conventional Surface / Monobloc Pumps
The Monobloc Controller is designed for single-phase Monobloc or surface water pumps installed outside the water source.
It is used to lift stored water from an underground reservoir, storage tank or similar source to an overhead delivery tank.
Typical Application
Underground Reservoir → Monobloc Pump → OHT
How It Works
Water is stored in an underground reservoir or source tank.
The Monobloc pump is installed outside the water source.
The Aqua Starter receives signals from the configured water-level sensors and controls the pump automatically.
When water needs to be transferred:
Source Water Available + OHT Requires Water → Pump ON
When the required water level is reached or source water is insufficient:
OHT Full / Source Empty → Pump OFF
Installation Method
1. Install the Aqua Starter controller near the Monobloc pump.
2. Install the appropriate source/reservoir level sensor.
3. Install the required delivery-tank/OHT level sensor.
4. Connect the sensors to the controller.
5. Connect the controller to the single-phase Monobloc/DOL-type pump arrangement.
6. Test automatic ON/OFF operation and protection functions.
Typical Uses
- Houses
- Flats and apartments
- Small buildings
- Shops and offices
- Farms
- Underground reservoir-to-OHT systems
Best Choice When:
A conventional surface/Monobloc pump is installed outside the water source and is used to lift stored water to an OHT.
---
TYPE 3 — AQUA STARTER SUBMERSIBLE CONTROLLER
For Borewell & Open-Well Submersible Pumps
The Submersible Controller is designed for submersible water pumps installed inside borewells, open wells or underground water sources.
It automatically manages pumping from the underground source to an overhead delivery tank.
Typical Application
Borewell / Open Well → Submersible Pump → OHT
How It Works
The submersible pump is installed inside the borewell or open well.
The Aqua Starter receives the required water-level/control signals and operates the submersible pump automatically.
When the OHT requires water and adequate source water is available:
OHT Requires Water + Source Available → Submersible Pump ON
When the OHT is full or source water becomes insufficient:
OHT Full / Source Condition → Pump OFF
The controller also provides protection functions such as dry-run and airlock protection, according to the specific installation and controller configuration.
Installation Method
1. Install the controller/starter arrangement at the appropriate electrical location outside the borewell/open well.
2. Install the required source-water sensing arrangement.
3. Install the appropriate OHT level sensors.
4. Connect the sensors to the controller.
5. Connect the controller to the submersible pump/starter arrangement.
6. Test automatic operation and protection functions.
Typical Uses
- Borewell pumping
- Open-well pumping
- Individual houses
- Apartments
- Farms
- Agricultural water systems
- Small commercial buildings
Best Choice When:
The pump itself is installed inside a borewell or open well and water needs to be automatically pumped to an OHT.
---
THREE TYPES — SIMPLE COMPARISON
Type| Water Source| Pump Location| Typical System
Supply Water Controller| Direct Mains / Supply Pipeline| Surface| Supply → Pump → OHT
Monobloc Controller| Underground Reservoir / Storage Tank| Outside water source| Reservoir → Monobloc → OHT
Submersible Controller| Borewell / Open Well| Inside water source| Borewell → Submersible → OHT
---
HOW TO CHOOSE THE RIGHT AQUA STARTER
Is your water coming through a Direct Mains / Urban Supply Pipeline?
➡️ Choose SUPPLY WATER CONTROLLER
Is your pump a conventional surface/Monobloc pump drawing water from a reservoir?
➡️ Choose MONOBLOC CONTROLLER
Is your pump installed inside a borewell or open well?
➡️ Choose SUBMERSIBLE CONTROLLER
---
THE AQUA STARTER CONCEPT
Whatever the installation, the basic objective remains the same:
DETECT → DECIDE → PUMP → STOP
Aqua Starter detects the required water condition, decides whether pumping is required, operates the pump and automatically stops it when the configured stopping condition is reached.
This reduces dependence on manual pump switching and makes everyday water management more convenient.
AQUA STARTER
Ultimate Water Pump Controller
One Smart Concept. Multiple Water-Pumping Applications.
Supply Water • Monobloc • Submersible
Install Aqua Starter.
Automate Your Pump. Manage Water Smarter. by NEXTGEN | Made in India
Location India Assam Chacher Silchar Arunachal
Logistics & reach
Serving Assam and nearby
Aqua Starter serves customers in Arunachal, Silchar, Chacher District. 65 places are covered in total.
- Arunachal
- Anilgarh
- Bankandi
- Barjalenga
- Barkhola
- Behara Bazar
- Bekirpar
- Bhagabazar
- Binnakand
- Borkhola
- Dalu
- Derby
- Dewan
- Dewanji Bazar
- Dholai Bazar
- Dwarband
- Engineering College
- Fulertal
- Gurucharan College
- Hilara Colony
No match here. Check the full list.
Talk to Aqua Starter
Water Pump Controller · Arunachal, Silchar, Chacher District. Send a message and get an answer from the business itself.
Reviews
No reviews of Aqua Starter yet — be the first to leave one.
Sign in to leave a review.
Reviews are tied to an account so a business is rated by real people, once each. Your Google name and picture appear on the review.
Direct line
Speak directly with Aqua Starter
Send a message and they reply to you themselves — no call centre in between.
Send an enquiry
Fill this in and Aqua Starter gets it straight away. You get a copy by email.